Dexion Horizontal Back Stops fix to uprights at the back of racking and prevent pallets from falling from the racking by acting as a barrier. While they are designed to take damage and not affect the main racking itself, it should be noted that they function as a visual aid and are not a pallet positioning device.
- Suitable for use with racking in which the standard pallet overhang is 50mm front and back, the horizontal bar is installed 50mm behind the rear side of the pallet
- Minimum length of frame spacer is 250mm for double entry racks
- The upright that the back stop is fixed to must be approximately 120mm higher than the upper edge of the highest beam
- If damage is incurred then the back stop should be replaced immediately
08082399422
